0%

0%

NikolaDi

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 11/14/2017.

Projects I Like & Follow

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijck Patrick Van Oosterwijck

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

The 2017 Hackaday Prize

Soldering pen for Weller RT tips with OLED display

RT Soldering pen

The 2017 Hackaday Prize

HeartyPatch is a fully open-source, IoT connected, BLE enabled heart-rate variability & ECG patch with great accuracy

HeartyPatch: A single-lead ECG-HR patch with ESP32

ashwin-k-whitchurch Ashwin K Whitchurch

The 2018 Hackaday Prize

A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output

Tiny Solar Energy Module (TSEM)

jasper-sikken Jasper Sikken

The 2018 Hackaday Prize

USB hid keyboard ... etc. for Raspberry PI

mini (Pi)QWERTY USB keyboard

The 2018 Hackaday Prize

Infinity Flashlight Powered by Your Own Body Heat

Body Heat Powered Flashlight

wasim-sahu Wasim Sahu

The 2018 Hackaday Prize

Do you miss those old small devices in your palm? Don't be sad, you can always build your own!

SDA - The best new PDA

The 2018 Hackaday Prize

ESP8266 based Solar Powered wireless Weather Station

SOLAR POWERED WIFI WEATHER STATION

open-green-energy Open Green Energy

The 2018 Hackaday Prize

Energy harvesting alternative for bikes including data logging, smart lighting system and power distribution board for power banks

imPulse

javier-betancor Javier Betancor

The 2018 Hackaday Prize

IMU-based encoders. IMcoders provides odometry data to robots with a minimal integration effort, easing prototyping on almost any system.

IMcoders

pablo-leyva Pablo Leyva

Hackaday Prize 2019

Freeform electronic circuit sculpture

Skeleton Watch

The 2018 Hackaday Prize

A smart bathroom scale, using 3D printing, ESP8266, Arduino IDE, Adafruit.IO and IFTTT app.

DIY Wi-Fi Smart Scale (with ESP8266)

The 2018 Hackaday Prize

Transfer data (WiFi credentials) from your smartphone to an ESP8266 by Pulsing your Smartphone Screen

ESP8266 Screen Set WiFi Credentials

eduardo-zola Eduardo Zola

The 2018 Hackaday Prize

A miniature power harvester solar-based for wearables, IoT and my smart ring series

Flexible wearable power harvester

enrique Enrique

The 2017 Hackaday Prize

A smart Bluetooth speaker which has features like 8 pt. FFT Spectrum Analyzer and Weather Monitor

Smart Bluetooth Speaker with Spectrum Analyzer

vishwas-navada-b Vishwas Navada B

For when you need something other than USB output on your powerbank

9-24V output 36W programmable Powerbank

The 2018 Hackaday Prize

In this project I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi

Kortex A1 wireless environment monitoring

amine-mehdi-mansouri Amine Mehdi Mansouri

View all

Bits

Patrick Van Oosterwijck wrote 08/20/2018 at 04:49

Thank you for liking my #wESP32: Wired ESP32 with Ethernet and PoE project Nikola!

Are you sure? yes | no

Radu Motisan wrote 08/19/2018 at 10:45

Thanks for following #City Air Quality . You can find more about this project here: https://www.youtube.com/watch?v=qNefYH_Hs5k . Also the hardware is already available and you can purchase it on Tindie to support this entire work, just search for "uRADMonitor"

Are you sure? yes | no