0%

0%

Jelle Spijker

Utrecht

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 10/08/2015.

Projects I Like & Follow

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

It can power the Raspberry Pi Zero over Ethernet. The board also adds an Ethernet Phy to the Raspberry Pi Zero to give you full Ethernet

PoEPi: Pi Zero Power over Ethernet with PHY

The 2017 Hackaday Prize

Quickly identify radioactive materials with a pocket-sized ion chamber. Built from standard parts for easy manufacture and low cost.

Open Radiation Detector

carlos-garcia-saura Carlos Garcia Saura

We've been waiting a long time for someone to post the plans of a working LiDAR. Is it really going to happen?

Open Source LiDAR - Unruly

laser-developer Laser Developer

Hackaday Prize 2019

Blackbox shifts 3D printing towards a multitool manufacturing robot.

Multitool 3D Printer - Blackbox

marc-schmann Marc Schömann

Hackaday Prize 2019

The reduction of strain-wave, but using a 'single' stage planetary gearset.

MPRT - Modified planetary robotics transmission

daren-schwenke Daren Schwenke

The 2017 Hackaday Prize

Always wanted to have Msps ADCs on a Raspberry ... Let's dig into it.

20Msps+ ADC RaspberryPi HAT

kelu124 kelu124

Much cleverer people hacked the orginal UT390B laser range finder but no-one seems to have published what we know about the UT390+.

Peek inside UNI-T UT390B+

simon-merrett Simon Merrett

$25 wearable device development platform: nRF51 ARM CortexM0 w/ Bluetooth, accelerometer, 16x64 OLED, vibration motor, HR sensor, battery

Hacking a $25 nRF51 ARM Cortex Activity Tracker

curt-white Curt White

Rebuilding cheap laser tape measure to universal laser rangefinder

Cheap laser tape measure reverse engineering

iliasam iliasam

Hackaday Prize 2020

A turntable wich you can fully 3D-print, no extra parts needed!

Fully 3D-printable turntable

brian-brocken Brian Brocken

Hackaday Prize 2019

3D printed hub, filament tires, Mecanum motion.

FilaMecanum

daren-schwenke Daren Schwenke

This project's goal is to gather 3D images via ultrasonic distance measurements and a sensor array.

Ultrasonic 3D scanner

I attempt to map the shape of my room using four HC-SR04 Ultrasonic distance sensors and a magnetic compass to measure the heading.

Mapping a Room with Ultrasonic Distance Sensors

param-aggarwal Param Aggarwal

The 2018 Hackaday Prize

3D-scanning of the environment with a cheap lidar module with fast movements for semi-random pixel updates instead of linewise updates.

LidarEye: fast 3D-scanning

janthar JanThar

A new model of solar panel based on thermoelectric conversion with Fresnel lens for radiation concentration and sun-tracking Arduino system.

Thermoelectric solar converter

This is a product match the anemometer to measure the wind speed, also provide other interfaces and sensor to measure tem, hum, and so on.

wind weather station

View all

Bits

kelu124 wrote 07/26/2016 at 07:32

Thanks for the follow !

Are you sure? yes | no