0%

0%

Jose Ignacio Romero

Passionate about electronics and automation, always looking to improve things!

Chicago, Illinois

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/07/2015.

My Projects

An extremely simple, dependable continuity tester

Low Power Continuity Tester

Jose Ignacio Romero

Homemade PLC-like electronic replacement for the mechanical timer in my washing machine.

Borg Washing Machine

Jose Ignacio Romero

3D printed part designed in FreeCAD during the KiCon 2019 conference

3D Printed KiCon 2019 Badge Screen Standoff

Jose Ignacio Romero

Flex-In-The-Middle device for analyzing the power consumption patterns of battery powered products

FITM (Flex-In-The-Middle) for power analysis

Jose Ignacio Romero

Beautiful 70's radio retrofitted with Bluetooth technology

Bluetooth Retro(fitted) Radio

Jose Ignacio Romero

Logic analyzer based on the cheaptastic FX2(LP) evaluation boards available on ebay.

Cypress FX2 Based 16-Channel Logic Analyzer

Jose Ignacio Romero

View all 7 projects

Projects I Like & Follow

Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.

DIY Pick and Place

The 2015 Hackaday Prize

Monitoring soil moisture at different depths to determine when to irrigate, and - more importantly - how much water is needed. Save 25%!

Vinduino, a wine grower's water saving project

Reinier van der Lee

Cheap, fully automated model train system with 99.9999% 3D printed parts.

Broke Hackers' Model Railway

Szabolcs Lőrincz

A collection of widgets/adapters/breakouts to make prototyping easier/faster

Breadboard Widgets

Stefan Lochbrunner

The 2016 Hackaday Prize

An overhaul of the iconic Power Glove to allow it to control robots, drones or anything your heart desires. It's so... good.

Power Glove Universal HID

Hackaday Prize 2019

The reduction of strain-wave, but using a 'single' stage planetary gearset.

MPRT - Modified planetary robotics transmission

This device is supposed to fit on a breadboard and show measured voltage. It supports autoranging (sort of...) and shows voltage polarity.

Small voltmeter

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

PowerBlade is the smallest, lowest cost, true-power plug-load power meter, and communicates to smartphones over BLE

PowerBlade

Hackaday Prize 2019

3D printed hub, filament tires, Mecanum motion.

FilaMecanum

An analog gauge with USB, serial and analog interface.

CPU Gauge

lukasz.iwaszkiewicz

a blinking {romantic} heart built with a bunch of leds and a Atmel ATTiny85 to rules them w/ charlie. Everything mounted on a home made pcb!

heartblink - a gift to my gf

Hackaday Prize 2019

Explore the spark of life through circuit art

Electronic sculpture

Voltmeter Clock

Seems weird, but that's exactly what I've done some 32 years ago

How to use more than 100% of program memory

nes controller with USB hub , USB keboard and USB flash drive inside. you just plug in the nes controller to a computer and off you go.

USB nes controller with built in emulator and ROMs

I found the front case/keypad of an HP-21 in electronics recycling a while ago. I'm going to try to get it working again with Trinket guts.

HP-21 calculator restoration/Arduino-fication

This is an upcycled AM Tube Radio

Radio

View all

Bits

Stefan Lochbrunner wrote 11/21/2015 at 12:36

Thanks for skulling! :)

Are you sure? yes | no