Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer

Projects oshpark likes and follows

11.4k
224
118
Itsy-chipsy is a chip platform that enables a multi-block service like-oshpark capable to offer area for your own chip, for as low as $100.
Project Owner Contributor

Itsy-Chipsy: Make your own $100 chip

OnchipOnchip

13.3k
182
122
AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25
Project Owner Contributor

Compact, $25 spectrometer

Kris WinerKris Winer

10.5k
175
84
The WorkHorse 3D Printer gives anyone the power of a factory. A custom robotics module on the printer automatically ejects print jobs.
Project Owner Contributor

Autonomous Infinite 3D Printing: WorkHorse 3D

Swaleh OwaisSwaleh Owais

7.3k
81
70
An Open Source Linear Actuator
Project Owner Contributor

Linear PCB Motor

Carl BugejaCarl Bugeja

1.4k
66
22
A system designed to be easy to build and setup. Uses two $20 webcams and open source software to provide accurate eye tracking
Project Owner Contributor

Low Cost Open Source Eye Tracking

John EvansJohn Evans

2.6k
62
44
Polar drawing machine built with fischertechnik and Arduino. Thanks to a G-code interpreter, it can draw any bitmap or vector graphics.
Project Owner Contributor

Polar Drawing Machine

davidatfsgdavidatfsg

991
61
18
A Wearable, "Smart", Internet of Things Development Board That Learns
Project Owner Contributor

BodiHub

Dave NghiemDave Nghiem

83
48
6
Landscape camera(s) with linear image sensors!
Project Owner Contributor

Pushbroom Panoramic Camera

Ted YapoTed Yapo

2.9k
31
29
A DIY solder paste dispenser. A DRV8825 drives a microstepper actuator in combination with syringe to deliver paste.
Project Owner Contributor

Hand Held Solder Paste Micro-dispenser

owhiteowhite

1.6k
29
20
A dumping place of experiments that I enjoy
Project Owner Contributor

PCB Art

JarrettJarrett

881
21
51
A proof that the PIC10F200 can be useful after all.
Project Owner Contributor

Morse blinking jewelry

Yann Guidon / YGDESYann Guidon / YGDES

409
21
14
A device that can calculate its location relative to a 24kHz sonic beacon
Project Owner Contributor

Location Sensor Module (ROACH)

Joseph PrimmerJoseph Primmer

1.2k
21
31
A handheld running CircuitPython and cheap enough for a badge.
Project Owner Contributor

CircuitPython Badge

ðeshipuðeshipu

1.4k
20
30
A face mask to wear on the dance floor. It has audio feedback and lots of ws2812b RGB LEDs. Yay!
Project Owner Contributor

I Shall Name Him: Rave Face

iSaxiSax

2.4k
14
18
An open source smart watch built for anxiety and panic disorder.
Project Owner Contributor

Minder

Austin MarandosAustin Marandos

700
14
12
This is an ISM band transceiver utilizing the Semtech SX1238. Similar to the popular RFM69 except with an added power amplifier on transmit.
Project Owner Contributor

500mW (27dB) ISM Band Transceiver

Jon ThomassonJon Thomasson

1.1k
12
4
Simple and fast build SMT component placing device
Project Owner Contributor

Super Simple SMT placement

TomTom

489
8
9
A simplified Enigma Machine build using 3d printed parts and printed circuit boards
Project Owner Contributor

Enigma Machine

Steven OsbornSteven Osborn

160
6
5
Just because everyone else is doing it with C doesn't make it right ;-)
Project Owner Contributor

STM8 eForth Wireless Sensor

ThomasThomas

184
5
13
A little board for controlling big loads with an MCU.
Project Owner Contributor

EasyFET

mcu_nerdmcu_nerd

90
3
9
A development board for the Atmega1284P.
Project Owner Contributor

1284P-Target

mcu_nerdmcu_nerd

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2018 Hackaday