0%

0%

Richard Nock

Electronics engineer which specialises in photon counting instrumentation.

UK

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/10/2022.

My Projects

Using 555s to detect hand distance and alter the pitch and volume of a software based DDS.

555 Theremin

Projects I Like & Follow

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

The 2017 Hackaday Prize

4 Digit Nixie Clock driven by Raspberry Pi Zero and Arduinix board.

Raspberry Pi Zero Nixie Clock

The 2018 Hackaday Prize

A low-cost STM32 board with motor controllers created along with visual programming and control software for use in education.

Visual Robotics Platform

2021 Hackaday Prize

An electric scooter that can be made entirely from printed parts and off the shelf components without any power tools!

RepRaTS 3D Printable E-Scooter

The 2016 Hackaday Prize

The garden squid is an open platform for indoor garden automation to bring software, hardware, and garden hackers together!

Garden Squid

Christine Banek

The 2018 Hackaday Prize

Basically you can turn regular fishing line and nichrome wire into a linear actuator that can contract much like a human muscle.

Material Linear-Actuator for Robotics

Brandon T. Wood

Classic NES version of Tetris on a DIY LED Matrix Display

NES Ledtris (LED Tetris)

Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing.

3D Printed Open Source UPcycler : SHRED-Buddy3D

A project for my grandchildren to first build line-following robots then convert them to being controlled by their phones and tablets.

IP control for inexpensive line following robots

Documentation for the NSSC-1 Used on the Hubble Telescope

NASA Standard Spacecraft Computer-1 (NSSC-1)

Hackaday Prize 2019

Nixie clock with Android support, Web interface support, FM radio, clock/date, sensors, relays, web stream radio stations, bt/wifi control

Soviet Nixie Clock

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

PC FM radio with RDA5807M without microcontroller. C# form control the chip through serial port.

PC FM radio with RDA5807M

Arduino based high voltage parallel programmer for AVR microcontrollers

AVR High Voltage Programmer 2

Dilshan Jayakody

This project will be the access point for my nRF24L01+ (mesh) network.

nRF24L01+ network internet access point

Peetselectronics

step by step how to build your own Concurrently Multi Channels VFOs Memory Scanner Software using GNU-RADIO Companion under Win 10

GNU-RADIO Scanner

High precision LED electronic clock based on STM32

0.8" LED Digital Clock

Robot for Combing Beard

Beard Combing Robot

View all

Bits