0%

0%

Enrico

Electronic Engineer and EE at heart, that oscillates with no control between firmwares and analog designs.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Alea

This user joined on 04/17/2016.

My Projects

Just another coin-size, wide input voltage range, low cost, failsafe, high power LED driver.

Glighter-S

An Arduino-compatible board to master the power. The first attempt of a compact dev-board capable to drive 10W loads.

Lino

Cheap and small, is another failsafe, analog controllable, 40W hysteretic buck LED driver, in a pill form factor.

Glighter-A, a tiny 40W LED Driver

Or how to write firmware the weird way to submit a project in the 1kB Challenge.

Hardware based RGBW Lamp controller

Reinventing the wheel on RGB lighting systems just for fun

Chroma Wheeler

The simplest, most efficient way to talk with the Upside Down

A realistic, yet another Stranger Things alphabet

View all 8 projects

Projects I Like & Follow

Hackaday Prize 2019

High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®

Axiom: 100+kW Motor Controller

The 2017 Hackaday Prize

A 2.5mm thick flexible smart watch with e-ink display, BT 4.0, and health sensors.

Flexible Smartwatch

nick-ames Nick Ames

The 2017 Hackaday Prize

Just because! A home computer without microprocessor

Gigatron TTL microcomputer

marcel-van-kervinck Marcel van Kervinck

2021 Hackaday Prize

A physical switch for my computer to choose between Linux and Windows

Hardware boot selection switch

stephen-holdaway Stephen Holdaway

An open-source, affordable, dynamic quadruped robot

mjbots quad

josh-pieper Josh Pieper

The 2017 Hackaday Prize

Fast, Portable and Affordable Oscilloscope and Inductance Meter

multiScope

vtor-barbosa Vítor Barbosa

The 2018 Hackaday Prize

A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output

Tiny Solar Energy Module (TSEM)

jasper-sikken Jasper Sikken

A Teensy 4.1 running as an Apple //e

Aiie! - an embedded Apple //e emulator

jorj-bauer Jorj Bauer

The 2018 Hackaday Prize

Itsy-chipsy is a chip platform that enables a multi-block service like-oshpark capable to offer area for your own chip, for as low as $100.

Itsy-Chipsy: Make your own $100 chip

3d position tracking using our own design of the sensors, an altera fpga for decoding the signals and custom code for triangulation and poseestimation

HTC vive lighthouse custom tracking

simon-trendel Simon Trendel

Umm... a ESP 32 CAN Driver ;)

ESP32 CAN Driver

The 2017 Hackaday Prize

Always wanted to have Msps ADCs on a Raspberry ... Let's dig into it.

20Msps+ ADC RaspberryPi HAT

kelu124 kelu124

The 2018 Hackaday Prize

ARM tutorial series aimed at serious developers wanting to learn programming and circuit building techniques for the production level.

ARM Microcontroller Bare Chip Tutorial Series

patrick-hood-daniel Patrick Hood-Daniel

360 degrees 3D LiDAR project

OpenLiDAR

robin-frjd Robin Fröjd

The 2017 Hackaday Prize

The fast, intuitive and modular way to make awesome portable projects that maximize creativity and sharing

MakerNet

jeremy-gilbert Jeremy Gilbert

The 2017 Hackaday Prize

As modern photography is revolutionized by LEDs, I'm applying my experience in this field to enhance my hobby

Portable LED Flash

yann-guidon-ygdes Yann Guidon / YGDES

Build this small oscilloscope. Up to 40KHz (25uS) / 50mV-50V / gain 1-100 / AC-DC / auto-trig / free sweep / 9V operation.

Mini Oscilloscope

Very small Waveblaster Compatible General MIDI board : 24mm x 34mm

S2: The smallest General MIDI board in the world

View all

Bits

David H Haffner Sr wrote 01/14/2017 at 18:23

Thank you for your interest in my project!

Are you sure? yes | no

kaktus circuits wrote 06/27/2016 at 08:13

Thank you for following Virtual ground! Jakub

Are you sure? yes | no