0%

0%

徐禾

菜鸡一枚

China

Following Follow me

Similar accounts worth following

This user joined on 07/22/2022.

Projects I Like & Follow

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-woo Timothy Woo

A 3D printed stereotax

3D printed rodent stereotaxic device

lex-kravitz Lex Kravitz

ARM Cortex-M4 + ARMv8. Motor interfaces. 54 I/O with UART, SPI, I2C, CAN. C++ 11 API. Cloud management. ROS-powered.

CORE2 - A computer for robots

The 2016 Hackaday Prize

Over the last 10 years or so my personal home automation controller has grown and grown.

Home Automation Console.

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Fully open source remote control for common electric skateboards using the NRF24L01+

Open esk8 Remote - v1

timo-birnschein Timo Birnschein

Simple analog Sanitiser Dispenser (No-Contact) using 555 timer IC with auto cut-off timer (even with trigger). Cheap and No-Coding Solution.

555 Sanitizer Dispenser (With cut-Off)

Add an ESP8266 to a Philips LivingColors gen1 to control it over WiFi without losing the ability to control it with the remote

Philips LivingColors gen1 WiFi addon

Setup a 433 MHZ transmitter/receiver with the Raspberry Pi for Home Assistant use

Raspberry Pi 433MHz RF Transmitter/Receiver

Supplyframe DesignLab: 2022 Hackada…

Wireless USB dongle (868MHz) for home automation to improve the indoor air quality (IAQ)

Fresh air automation by RF usb dongle

Another Z80 single-board computer.

Z80 Single-board computer (with AVR controller)

we all love to play games and its fun but it will be more fun if make our own game controller to play games on our PC.

Arduino Game controller using Arduino PRO MICRO

Programming DJI Tello using GoBot

Flying DJI Tello with GO Programming Language

The 2016 Hackaday Prize

We are building an assistive robotic arm for my daughter who recently became paralyzed in her left arm.

Building an Assistive Robotic Arm

bodo-hoenen Bodo Hoenen

Using AT commands we can change name,bud rate etc of Bluetooth module(hc-05,06)using some simple steps.

Change your Bluetooth properties using AT commands

A remote control differential drive robot car where the linear & angular velocities of the are controlled using a PID control system.

Remote Control Differential Drive Robot Car

ghani-lawal Ghani Lawal

Arduino based high voltage parallel programmer for AVR microcontrollers

AVR High Voltage Programmer 2

dilshan-jayakody Dilshan Jayakody

An SPI interface for 6502 microcomputers using discrete logic gates

SPI Master

nate-rivard Nate Rivard

View all

Bits