0%

0%

IVAN

engineer technologist

Россия

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/19/2018.

My Projects

Hackaday Prize 2019

1 Name of work - the manufacture of 3D printer for printing filled polymers.

3D printer

Projects I Like & Follow

2021 Hackaday Prize

A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.

MiniHawk VTOL

steve-carlson Steve Carlson

Design, development and build of an open-sourced SLS 3D Printer suitable for hobby users.

SLS4All - Affordable SLS 3D Printer

tomas-starek Tomas Starek

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

OPEN SOURCE / 3D printed robot. Arduino M0 based and created using common elements from the Makers/ 3D printers World.

PyBot SCARA Robotic Arm (3D printed + Python)

jjrobotscom jjrobots.com

Supplyframe DesignLab: 2022 Hackada…

Portable spot welder that doesn't need microcontrollers, uses recycled industrial thyristor and mostly off-the-shelf components

Not-so-smart capacitive discharge spot welder

Wojciech "adalbert" J

Quadrifilar helix antenna for GPS/GNSS

Active GNSS antenna

marc-andr-denis Marc-André Denis

Cheap 3d printed hi torque robot actuator with electronics

Hi torque 3d printed cheap robot actuator

pavel-g Pavel G.

This project is an automated winder for making custom pickups for a guitar or a tonewheel organ

Automated Pickup Winder

A custom-built pick-and-place machine running OpenPnP.

Pick-and-Place Machine

In this project I make my own brushless motor controller to implement several commutation strategies all the way to field-oriented control.

DIY Field-Oriented Control ESC

Supplyframe DesignLab: 2022 Hackada…

An open source large format 3D-printer for plastic re-/upcycling

Bloft Mk2 - 3D printer for plastic waste

atte-linna Atte Linna

DIY BLHeli / SimonK 8-Bit ESC

DIY 4 in 1 BLDC ESC 30A 3~4S

Additional system for Delta-Robot One to transport things into the robots workingspace

Conveyor System for Delta-Robot One

pascal-buerger Pascal Buerger

In this project, I will try to create 3D printed pick and place machine.

3D printed pick and place machine

miroslav-zuzelka Miroslav Zuzelka

A design for a compact, comfortable, reusable face mask that seals to your face and has replaceable air filters that are easy to procedure.

Covid-19 3D Printed Face Mask

radu-motisan Radu Motisan

This quick project implements a coil winding machine with an ESP32 SoC and two stepper motors.

CoilWinder based on grbl for ESP32

We look at a BLE based Location Tracker and BLE Beacons. The tracker works with LoRa technology which gives it a range of few 10's kms.

BLE & LoRa based Indoor Location Tracker w/o GPS

akarshagarwal98

For exceeding power supply limit of battery, here posted several applied power module designed for drone specially, never limit your imagine

Hybird Power

View all

Bits

Lance wrote 11/25/2021 at 12:44

Thanks for following my #Pick-and-Place Machine project!

Are you sure? yes | no