0%

0%

Charlie Smith

Physics student, spending most of my free time with electronics especially microprocessors. Also model rockets.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 08/05/2020.

My Projects

Angle of arrival 2.4GHz radio signal direction finding

Micro MUSIC

Simplified 16-bit computer using mostly 74LSxx logic

Simple 16-bit Computer

Projects I Like & Follow

I upgraded my cheap $154 3D printer into a high quality 3D printer with 3D printed parts which you can download for free.

Upgraded cheap 3D printer into a high quality

Mateo Miličević

USB Power Delivery Based Lithium Polymer Battery Charger

LiPow - The USB C LiPo Battery Charger

Hackaday Prize 2019

When did the charm of holding a bulky receiver to your ear end? What if we could bring the feel of the old times to our smartphones?

An old rotary phone as Bluetooth set

Using an ePaper Display, investigate getting the lowest possible current usage from an STM32L0.

Coin Cell Powered Temperature/Humidity Display

The 2018 Hackaday Prize

Robotic platform for water quality sensors inspired by clams.

Open Source Underwater Distributed Sensor Network

Michael Barton-Sweeney

The 2018 Hackaday Prize

Yet another open source platform for drones, but this one is fully integrated and uses the SAME70@300Mhz x2 + a Pi Compute Module

Open Source All-In Drone-Droni SAME70Pi (Kopernik)

The best of model rocket tech powered by Arduino!!

Arduino TVC ModelRocket

My take on an autonomous satellite image collector grabbing from NOAA 15/18/19. (Leave Behind - Collection Device)

NOAA LB-CD

20 autonomous battery-powered bright LEDs, TouchOSC interface, generative art, Artnet(DMX)/OpenSoundControl support

Radio LED controller

Alexander Urbanovich

WaterJet for drone

UNDERWATER IMPELLER MOTOR

Roman Weitendorf

Using AI and robotics to deliver an instant response to school shootings

Mantis - Preventing School Shootings

Hackaday Prize 2020

When you absolutely, positively got to kill every Microbe in the room. Accept no substitutes.

Ultraviolet Lightsaber. Kill COVID-19 with Style.

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

Hackaday Prize 2019

1 Name of work - the manufacture of 3D printer for printing filled polymers.

3D printer

Hackaday has a chat for everything except drones

Chat for Drones

I made a simple antenna, used cheap TV Tuner and with such hardware controlled via some software I was able to pick satellite signals/images

Recieving the earth's photos from real satellites

Hackaday Prize 2019

A project to protect your home from a runaway 3D printer and also monitor and log air quality around your printer.

3D Printer Safety and Air Quality Monitor

Palm V - Wifi upgrade

Palm W

View all

Bits