0%

0%

J. Ian Lindsay

Tall, well-spoken polymath.

Denver, CO

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/15/2014.

My Projects

Official Hackaday Prize Entry

Digitabulum is an open motion-capture glove that was intended to be a full-featured, hacker-friendly user-input and sensor platform.

Digitabulum: The last motion-capture glove

Here is discussed a PHP class to hide encrypted messages and files inside of images without significantly changing the way the image looks.

Bury it under the noise floor

Murum Lux ("Wall of Light") is a 64x96 pixel LED array driven by a ChipKIT WiFire board and an MGC3130 e-field sensor.

Murum Lux

An analog cross-point switch with adjustable output attenuation.

ViamSonus (Audio router)

A general API client with automated triggering conditions for Android.

WebRemote

A multi-platform asynchronous operating system wrapper.

LibManuvr

View all 17 projects

Projects I Contribute To

Tindie

A place for Tindie sellers and the community to meet and stretch their legs

Tindie Dog Park

Projects I Like & Follow

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

Patrick Van Oosterwijck

The 2016 Hackaday Prize

Capture interactive models of magnetic fields with your 3D printer

3D Magnetic Field Scanner

The 2018 Hackaday Prize

An open hardware-software framework based on inertial sensors that anyone can use to build a human motion capture system.

Motion Capture system that you can build yourself

Bruno Laurencich

The 2017 Hackaday Prize

KiCAD component and footprint libary for ESP32 ,ESP32-WROOM, and ESP3212 modules

ESP32 KiCAD Library

The 2016 Hackaday Prize

Network Analyzer on an Arduino Shield which covers from 0-72MHz.

Arduino Network Analyzer

Hackaday Prize 2019

Fun-on-a-Keychain is back, packing all your games and multiple emulators in a cute and extremely tiny handheld console.

FunKey project - All your games on your keychain !

The 2016 Hackaday Prize

The DIY laptop built entirely from PCB

ELLO 2M

An open-source minimalist 68020 based single board computer

rhombus

Jason Westervelt

A better-than-servo motor for robotics

Custom motor for robotics

PlatformIO is an open source ecosystem for IoT development (Cross-platform IDE and unified debugger. Remote testing and firmware updates)

PlatformIO

The 2015 Hackaday Prize

Using a cluster of five raspberry pis, a Flir Lepton and three Raspberry pi NOIR cameras with appropriate filters, an imager was born.

Synthetic Aperture Multispectral Imager

Conrad Farnsworth

Visualizing the Earth's magnetic field vector in its three dimensional glory.

3D Compass

This board is for prototyping electrotactile interactions - use an electronic signal to dynamically change the texture of a surface.

WEFT electrovibration demo board

04K - 50K LUT. Kicad. Open source. Pin header 1.27mm. 92 IOs. Breadboard-compatible. Lots of optional GND.

Altera MAX10 Breakout Board

The 2016 Hackaday Prize

Instead of playing with iron fillings (9th class) we developed a scanner that maps magnetic fields in a 3D vector field for MatLab

3D-Vectorfield Scanner for Magnetic Flux

Myrijam Myrijam

A Modular VR / AR Protoboard Designed for 3D Printing

DIYHMD

A VGA driver on the FPGA side of the SoC connects to the ARM side. 8-bit pixels were used to conserve memory on the FPGA

VGA graphics for ARM SoC

Add your info and a link to your project if you are looking for a collaborator. Please see guidelines in description.

Collaborator Matchup

View all

Bits

Patrick Van Oosterwijck wrote 09/09/2018 at 05:35

Thanks for liking my #wESP32: Wired ESP32 with Ethernet and PoE project!

Are you sure? yes | no

John Leeman wrote 03/31/2016 at 11:38

Thanks for checking out the 3D compass!

Are you sure? yes | no