Projects Pascal Buerger likes and follows

Sort by:

The 2017 Hackaday Prize

MFRC522 RFID on ESP8266 featuring WebSocket, JSON, NTP Client, Javascript , SPIFFS

ESP RFID

The 2017 Hackaday Prize

An educational system designed to bring AI and complex robotics into the home and school on a budget.

Cardware

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

Since rpi zero is unobtainum, I got a few.

raspberry pi zero handheld computer

Fully 3D Printed 6 DOF Arduino Robot Arm

LittleArm Big

I upgraded my cheap $154 3D printer into a high quality 3D printer with 3D printed parts which you can download for free.

Upgraded cheap 3D printer into a high quality

Mateo Miličević

How to design your own HAT module including ID EEPROM.

Designing a Raspberry Pi HAT

full telescope control over WiFi using INDI on a RPi Zero W

Raspberry Pi Driven Telescope Mount

The 2017 Hackaday Prize

This is a easy-to-build Segway with Arduino Nano.

Arduino Segway

Vinícius Jean Ferreira

Hackaday Prize 2019

Convert your GameCube controller to Bluetooth for playing on the Switch, emulators and more

BlueCubeMod: Bluetooth GameCube Controller Mod Kit

Raspberry Pi + Camera Module + Dynamixel AX-12A Servos

Raspberry Pi Robot Arm With Computer Vision

The 2018 Hackaday Prize

An open-source panoply of UAVCAN connected boards to enable smart sensors and actuators for modular robotics development

CVRA's Robotics CAN Ecosystem

The 2018 Hackaday Prize

Have some old phones lying around? Thinking what to do with them? Here's how you can use them.....!

Convert your old phone into a remote switch

Vishwas Navada B

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

A joule thief powered by an easy-to-make aluminium air cell.

Aluminium powered joule thief

Hackaday Prize 2020

A UV light curing chamber made with an old rack, some aluminum foil, and three 50W UV LEDS. An Arduino is used as a programmable timer.

UV Curing Chamber

Andrés Lopez Pulzovan

Reverse engineering another display

Adaptive co 72x24 LED matrix display (FPGA driven)

AUTONOMOUS ROBOT

VISION

Make a Raspberry Pi replacement using a Cypress Semiconductor Programmable System on a Chip (PSOC 5)

Not Quite Useless Raspberry Pi Replacement

land-boards.com

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor