0%

0%

stefan.schnitzer

""

Austria

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

thingiverse

This user joined on 08/21/2016.

My Projects

A DIY smart home system the SCADA way...

DIY SCADA / smart home

stefan.schnitzer

A mostly 3D printed automated cat feeder (part of my SCADA)

DIY SCADA / cat feeder

stefan.schnitzer

a simple approach to home energy monitoring (with smart home integration)

electrical energy monitor

stefan.schnitzer

a multi-purpose remote I/O (RIO) module for my DIY SCADA

DIY SCADA / wireless and wired remote I/O

stefan.schnitzer

building a container home that fulfills Austrian building codes

boxy home

stefan.schnitzer

My Lists

CNC

tbd

Curated by stefan.schnitzer

DIY SCADA / smart home

A list for all DIY smart home projects

Curated by stefan.schnitzer

My Pages

Thank you to all of you how follows my page and projects.
10/12/2019 at 06:16 • 0 comments

Thank you to all of you how follows my page and projects.

Please check out my project: https://hackaday.io/project/14862-diy-scada-smart-home

Projects I Like & Follow

Customizable OLED keyboard that adapts to the apps you use

Keybon – Adaptive Macro Keyboard

A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.

Minimal Raspberry Pi CM 4 Carrier

Prof. Fartsparkle

An interface breakout board for Raspberry Pi Compute Module 4, permanently attached to a 7" IPS touchscreen display

Raspberry Pi CM4 Сarrier with Hi-Res MIPI Display

-- PLEASE STAND BY --

A full scale, working Fallout Terminal replica

ciprian ciprian

An almost completely 3D-printable shredder that can be used to shred 3D-prints ;-)

3D-printable shredder

A low cost 3D printed CNC that can be built with minimal tools yet is capable of great things.

MultiBot CNC v2

An launch pad and gantry for the LEGO Saturn V model. Crane, crew arm, gantry arms, service arms and model itself are animated for liftoff.

An animated Saturn V launch pad and gantry

Organize and find drill bits in the 21st century.

Drill bit Organizer

A working and somewhat practical demonstration of ECM

A Simple Electrochemical Machining Project

I hacked apart The Child plush toy from the Mandalorian and added a robotic core.

The Child: Animatronic hack of Baby Yoda plush toy

Kevin Harrington

A smart reflow oven with a nice user interface (lvgl), powered by an ESP32.

Reflow Oven

BLE-enabled ATMega based smartwatch in a case suitable for everyday use

SUhr

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Spend months watching your favorite film

Slowmovie: Cinema on a 2.7" Epaper Display

Goal is to simulate a lunar landng and take off with the LEGO Lunar Lander

Animatronic LEGO Lunar Lander

Quick simple robot project.

Mechanum Robot - MAIXDUINO

Bringing analog hvac system into home automation.

Apartment HVAC IoT

Reverse engineering an automatic dog door ultrasonic protocol to control it

Automatic Dog Door Smart Home Interface

View all

Bits

Michael Gardi wrote 10/01/2020 at 15:38

Thank you Stefan for your interest in my TMD-2: Turing Machine Demonstrator Mark 2 project.

Are you sure? yes | no

danjovic wrote 04/23/2020 at 02:41

Thanks for liking and following #Control Freak !

Are you sure? yes | no

Starhawk wrote 12/07/2019 at 22:49

Why hello there! Thanks for the +Like and Follow... more is coming, I promise :)

Are you sure? yes | no

Wassim wrote 10/15/2019 at 16:12

Thank you for liking my project #Home Smart Mesh. If you'd like to reuse anything, it's all open source, and if you have any questions, I'll be glad to help. Also advices or recommendations are welcome.

P.S: I just discovered what SCADA means, funny name for IoT/Home Automation/ Smart stuff :)

Are you sure? yes | no

stefan.schnitzer wrote 10/28/2019 at 04:15

You're welcome. I really like your project.
I have an background in large scale industrial automation. That's the reason why i look at all this IoT devices from the Supervisory Control and Data Acquisition perspective ;)

Are you sure? yes | no

nj1337 wrote 09/27/2019 at 09:07

Thank you for following my little project =)

Are you sure? yes | no

stefan.schnitzer wrote 09/29/2019 at 15:15

You're welcome :)

I would like to build something similar and integrate it into my smart home system.

Are you sure? yes | no