Close
0%
0%

Duane Degn

Robotics Enthusiast
Propeller Microcontroller Superfan

United States
Following
Send a private message
Similar accounts worth following
30 Followers
20 Following
6 Projects
103 Likes
duane-degn
Send a private message

This user joined on 01/21/2015.

5.6k
67
6
31
A large hexapod using a frame from ebay, HXT12K servos from HobbyKing and a Parallax Propeller as the controller.
Project Owner Contributor

Halloween Hex

Duane DegnDuane Degn

12.4k
47
31
25
My attempt to add inputs and outputs to the Robomaster S1 platform.
Project Owner Contributor

DJI Robomaster S1 Hacks

Duane DegnDuane Degn

2.6k
2.4k
5
24
A robot to remind and assist people with health maintenance tasks.
Project Owner Contributor

Health Maintenance Robot

Duane DegnDuane Degn

1.5k
11
1
10
Things I've learned about the DJI FPV quadcopter.
Project Owner Contributor

DJI FPV Investigations

Duane DegnDuane Degn

2.1k
22
5
7
I added a set of Vex Mecanum wheels to a Dagu Rover 5 platform.
Project Owner Contributor

Mecanum Wheeled Rover 5

Duane DegnDuane Degn

2k
32
5
6
A relatively simple controller for my CNC router using a Propeller Microcontroller.
Project Owner Contributor

Propeller Based CNC Router Controller

Duane DegnDuane Degn

16.1k
471
8
57
All Sky meteorite camera build under 150$.
Project Owner Contributor

Cheap All Sky camera project with Raspberry Pi

jippo12jippo12

15.2k
331
17
249
A maker friendly capstan based BLDC driven quadrupedal robot. Based on mjbots electronics
Project Owner Contributor

Stanley - the capstan based quadruped

Damian LickindorfDamian Lickindorf

8.8k
135
11
130
This is my 3D printed 3-axis motion control slider for my DSLR camera.
Project Owner Contributor

3-Axis Camera Slider

Isaac ChasteauIsaac Chasteau

5.8k
90
2
67
Cheap, safe, and compliant 6 - Axis 3d printed robotic arm based on Quasi direct drive BLDC drives.
Project Owner Contributor

CM6 - Compliant 3D printed robotic arm

Petar CrnjakPetar Crnjak

4.5k
375
1
67
Medium-sized 12-DOF Quadruped Robot inspired by MIT Cheetah and Boston Dynamics Spot Mini
Project Owner Contributor

NOMAD Quadrupedal Robot

Implemented RoboticsImplemented Robotics

4.2k
44
13
45
Ultra low-cost controller for brushless servo based on the B-G431B-ESC1 Discovery kit by ST
Project Owner Contributor

B-G431B-ESC Brushless Servo Controller

pat92frpat92fr

2.5k
27
2
26
GPS Guided Parachute Recovery System
Project Owner Contributor

R2Home

Yohan HadjiYohan Hadji

2.4k
35
5
29
Open Source, Child-Focused Leg Exoskeleton for accessibility in developing communities.
Project Owner Contributor

Alice Open Source Exoskeleton 2021 Update

Jesús Tamez-DuqueJesús Tamez-Duque

2.1k
97
2
18
This device is for automating a timed inflation/deflation cycle for an inflatable vest.
Project Owner Contributor

Automatic Timed Inflation Device

TevianTevian

1.9k
38
1
35
A big metal tank controlled by a raspberry, over Wi-Fi and a control station. To test the software, a small tank with the same capabilities.
Project Owner Contributor

Big and Small Tank

SimonSimon

1.6k
20
3
27
Aren't they stunning?
Project Owner Contributor

Geodesic(k) RGB LED Spheres

WhityWhity

1.3k
18
4
28
A satisfying clickity on/off switch for your PCB projects
Project Owner Contributor

KAN-15 LED Tactile Switch

JeremyJeremy

1.3k
23
5
28
PnPAssist is a tool that helps you to assemble PCB boards manually.
Project Owner Contributor

PnPAssist

Nuri ErginerNuri Erginer

1.1k
6
2
10
Goal is to simulate a lunar landng and take off with the LEGO Lunar Lander
Project Owner Contributor

Animatronic LEGO Lunar Lander

Mark HoweMark Howe

1k
8
0
9
This is a product match the anemometer to measure the wind speed, also provide other interfaces and sensor to measure tem, hum, and so on.
Project Owner Contributor

wind weather station

MakerfabsMakerfabs

980
13
0
13
Is it possible to build a precise Fluorescence Imaging Device at home?
Project Owner Contributor

A DIY Imaging Fluorometer

MaykeMayke

712
6
0
7
3D printed running aid
Project Owner Contributor

3D printed truck

lion mclionheadlion mclionhead

622
2
0
3
ESP32 / Micropython based wireless spectrometer
Project Owner Contributor

Spectral ESP

CarbonCycleCarbonCycle

View all

Share this profile

Share

Bits

Nuri Erginer wrote 06/21/2021 at 07:04 • point

Thanks for following #PnPAssist 

  Are you sure? yes | no

John Leeman wrote 09/12/2015 at 18:31 • point

Thank you for following the 3D compass! I hope you find it fun and educational! Best. - John

  Are you sure? yes | no

Dan Berard wrote 03/29/2015 at 19:08 • point

Thanks for following my project!

  Are you sure? yes | no

frankstripod wrote 03/11/2015 at 19:29 • point

Thank you for following my project. I like your rebellious attitude of following my project, even against my own advice. I like your Halloween Hex eyes even better.

  Are you sure? yes | no

Send a private message to Duane Degn

Become cool instantly

Create your Hackaday.io profile like Duane Degn and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2021 Hackaday

Report user as inappropriate

You are about to report the user "Duane Degn", please tell us the reason.