0%

0%

Jake Wachlin

Builder of too many projects at the same time

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/13/2016.

My Projects

Testing and development of a system to cut traces on a blank PCB using electro-discharge machining with pencil lead

PCB Fabrication with EDM

The 2018 Hackaday Prize

SOL is a project to develop a solar powered, connected solar intensity sensor (also known as a pyranometer)

SOL: Long-term solar intensity sensing

A simple example and explanation of how to use ESP-Now for communication between ESP32 devices

Hello World for ESP-NOW

Single axis barn-door style star tracker for long exposure astrophotography

Astrophotography Star Tracker

A low-cost and accurate tool for analyzing the power consumption of ultra-low power and IoT devices with rapidly changing current usage

MetaShunt: High Dynamic Range Current Measurement

Dual micro-gearmotor controller with CAN bus interface and onboard motion primitives

CAN Controlled Dual Closed-Loop Motor Controller

View all 19 projects

Projects I Contribute To

Low cost ventilator for standalone use during the Covid-19 pandemic

Low Cost Ventilator

My Lists

Ultra-Low Power

All things ultra-low power: low power electronics, modeling tools, measurement tools, energy harvesting, etc.

Curated by Jake Wachlin

Projects I Like & Follow

The 2015 Hackaday Prize

An Arduino based Solar MPPT charge controller.

ARDUINO MPPT SOLAR CHARGE CONTROLLER

open-green-energy Open Green Energy

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

A 3d printed enclosure to house multiple Pis

Raspberry Pi Rack

dave-pedu Dave Pedu

The 2017 Hackaday Prize

RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.

RepRap HELIOS

nicholas-seward Nicholas Seward

The 2018 Hackaday Prize

A tiny, low-cost, and scalable device for sub-millimetric 3D positioning.

HiveTracker

cedric-honnet Cedric Honnet

Hackaday Prize 2019

System for monitoring conditions of plants and weather conditions at agricultural fields

eAgrar - digital agriculture

slaven-damjanovic Slaven Damjanovic

Hackaday Prize 2019

Convert your bicycle to electric in seconds. No tools or skills required

BikeOn

shushanik-khachaturian Shushanik Khachaturian

Strain wave or harmonic drive gears are cool. As a cheap analog for metal or flex filament splined cup, try using timing belts.

Strain Wave Gear with Timing Belts

simon-merrett Simon Merrett

Hackaday Prize 2020

Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.

WinDIY - HAWT Wind turbine

I was inspired when I saw clock made by Humans Since 1982. One year ago I made one. Now it is time to share how I did it.

digital clock made of analog clocks

The 2016 Hackaday Prize

The DIY laptop built entirely from PCB

ELLO 2M

Wirelessly control a humidifier based on time and humidity

Control a Humidifier with a Raspberry Pi

Hackaday Prize 2019

The reduction of strain-wave, but using a 'single' stage planetary gearset.

MPRT - Modified planetary robotics transmission

Rpi B+ and Webcam security system with motion, dvr, and remote access.

Raspberry Pi Security System

Mike [Cazzwell] Cassell

The 2015 Hackaday Prize

... with video pass-through ...

DIY Augmented Reality Device

arcadia-labs Arcadia Labs

The G-EDM is an electrical discharge machine that supports sinker EDM, EDM engraving, EDM drilling and Wire EDM operations. #Drahterodieren

G-EDM

A mist-based tower system for growing leafy green vegetables

The Little Green Tower

chris-johnson Chris Johnson

View all

Bits